A0601/hpux/INSTALL
revision: 1998-02-27
----------------------------------------------------------------------


HP ELOQUENCE A.06.01 - Installation Instructions
================================================

HP Eloquence can only be installed and run on HP-UX Operating 
System Release 9.0 or later. 
HP Eloquence A.06.01 will be installed in the /opt/eloquence6
directory and will not affect any previous HP Eloquence A.05.xx
revision.

In order to install HP Eloquence, you need to unpack the files
with gzip.  Gzip is included with HP-UX 10.x and can be obtained
for HP-UX 9.x from this ftp server in the /pub directory.


Installing on HP-UX 9.x:
------------------------

   As "superuser," follow the steps below to install the HP Eloquence
   software.

   1. Unpack the archive at a temporary location

         gzip -d B1368B.updt.gz

      This unpacks B1368B.updt.gz to B1368B.updt. The compressed
      archive file is deleted.

   2. Run update(1m) by typing:

         /etc/update

   3. Select "Change Source or Destination ->".

   4. Select "From Tape Device to Local System ...".

   5. Tab to the "Source" field and enter the following:

         /tmp/B1368B.updt

      where /tmp is the directory where the B1368B.updt file
      is located.

   6. Press "Done".

   7. Select "Select/View Partitions and Filesets ..."

   8. Activate the HP Eloquence partition(s) you would like to 
      install:
      
      B1368B-A0600     - Base product
      B1368B-A0600-T   - Install a 30 days temporary license key
      B1368B-MIG       - HP260 migration tools
      B1368B-PDF       - Documentation in PDF format
      B1368B-HTML      - Documentation in HTML format

   9. Select "Start Loading".

   10. Type "y" to "Start loading filesets now?".

   11. Check /tmp/update.log to make sure installation completed 
       with no error.


Installing on HP-UX 10.x:
-------------------------

   As "superuser," follow the steps below to install the HP Eloquence
   software.

   1. Unpack the archive at a temporary location

         gzip -d B1368B.sd.gz

      This unpacks B1368B.sd.gz to B1368B.sd. The compressed
      archive file is deleted.

   2. Run "swinstall" by typing:

         /usr/sbin/swinstall -s /tmp/B1368B.sd

      where /tmp is the directory where the B1368B.sd file
      is located.

   3. In the Software Selection Window, select/highlight the product
      options you would like to install then choose the "Mark for 
      Install" item from the Actions Menu. 
      The "Marked?" column will automatically be set to "Yes".
      
      The following options are available:
      B1368B         - Install the base software
      B1368B-TLIC    - Install a 30 days temporary license key
      B1368B-ALL     - Install all file sets
      
      When opening the B1368B-ALL bundle, you can enable/disable
      individual product options.
      
   4. Select the "Install (analysis...)" item from the Actions Menu.
      When the analysis is finished with no error, i.e. Status:Ready, 
      click OK.

   5. Click Yes in the Confirmation window to begin the actual
      installation process.

   6. When the installation is completed, a dialog is displayed to 
      notify you that the install task is completed.  You may exit then.